Are you going to have your trampoline installed or will you do it yourself? Installing a trampoline can be quite a task if you do it yourself, but it’s definitely doable. First, it’s important to determine whether you have an Inground trampoline or a flatground trampoline. If you have an Inground trampoline, you’re in the right place—here you’ll find a step-by-step guide on how to dig it in. If you have an UltraFlat trampoline, click here for the dig-in instructions. If you have a PremiumFlat trampoline, click here for the dig-in instructions.
Since we’re talking about an in-ground trampoline here, it’s important to think well about the location where you’re going to place the trampoline. Because yes, you already guessed it, relocating the trampoline after digging it in is out of the question. For safety reasons, we advise you to keep at least 2 meters free around the trampoline and at least 3 meters above it. If you don’t have this space, we advise you to soften the area around the trampoline and remove any obstacles.
Have you determined the location? Then the next step is to measure and draw the hole. Use the following measurements for this. Do not make the hole too small or too large. This way you will maintain the solidity of the ground.
Did you measure and draw the hole where you want the trampoline? Well done! It is now important that you dig to the deepest point of the trampoline. This deepest point should be in the exact centre of the hole to be dug. Start digging here and try to dig your way out from a deep point. This way, you will have a good result and you don’t need to reinforce the wall unnecessarily. For the dimensions of the hole and the deepest point, you can use the illustrations below.
| Trampoline | 244 cm | 305 cm | 366 cm | 427 cm | 281 x 201 cm | 310 x 232 cm | 380 x 275 cm |
|---|---|---|---|---|---|---|---|
| A | 210 cm | 260 cm | 320 cm | 380 cm | 230 x 150 cm | 260 x 180 cm | 330 x 225 cm |
| B | 55 cm | 65 cm | 70 cm | 70 cm | 65 cm | 70 cm | 95 cm |
Did you dig the deepest point of the hole? Then the next step is to dig it out into a bowl shape. This is an essential step for ensuring that the wall construction retains its strength. However, the bowl must be deep enough in all places. An example to make this clearer:
Suppose you have a 305cm or 10ft Etan Premium in-ground trampoline. It has a minimum depth of 65cm in the middle of the hole. You dig from that point to the outside. Make sure you dig out in a bowl shape, as shown in the picture on the right.
Digging a hole is not difficult, but it is important that you always test whether you have dug to the right depth before letting the children jump on it. Do this by jumping up and down on all spots of the trampoline. Are you not touching the bottom? Are you confident that the hole is deep enough? If not, dig away an extra bit of sand. We always recommend placing root fabric in the hole, this prevents most weeds in the pit. Now, your hole is ready and you can place the trampoline over it. Don’t forget to anchor it! Your in-ground trampoline is ready and the kids can go crazy! Have fun jumping!
Does digging in a trampoline sound like way too much work? Or do you just not feel like tackling such a big job yourself? Don’t worry — you’re definitely not the only one! At Etan Trampolines, we offer the complete package. Not just the inground trampoline, but also a full trampoline installation service. That’s why we take care of the entire process — from A to Z — in the Netherlands and Flanders. Our professionals have already installed hundreds of trampolines and will make sure you can start jumping safely and happily right after. Curious about the possibilities? Click the button below!
